Huawei MA5633 overview, the features

SmartAX MA5633 is CMTS equipment based on the DOCSIS3.0 and C-DOCSIS protocol. Mainly used in radio and television networks convergence and bandwidth speeding up constructionof multi service access, can provide high bandwidth for radio and television operators.

The features of the MA5633

Compatible with current CM, OSS system management; polymerization can be PON interface between the shield OLT and CMC equipment, CMC equipment without an independent element management, reduce network maintenance OPEX.

The high bandwidth, multi service: Gigabit to the floor, hundreds of megabytes tohouseholds. Downlink provides 16 frequency points upward, provides 4 frequency points.Provide CATV, HSI, VOD and other services for home users, also support L2VPN, support enterprises to access and Wifi hot cover. The perfect support for PacketCable.

High integrated light station: MA5633 ONU, CMTS processing module, the power multiplier,mixer, the receiving machine in one, greatly simplify the construction and installation,convenient maintenance.

And FTTx platform network: distributed CMTS (D-CMTS) support and FTTx platform,architecture, co management network, the meet operator access mode, can smooth the transition to the FTTH.

More information about MA5633, please view http://www.huanetwork.com, Request a quote for MA5633 by emailing us at sales@huanetwork.com or pick up the phone and speak to one of our friendly and helpful sales reps at +852-30501940 (Hong Kong).

Huawei S5700-28C-SI: multi service and high bandwidth access

If you are looking for a switch to meet business high bandwidth access communion, Huawei S5700-28C-SI is the great one.

Huawei S5700-28C-SI Gigabit enterprise switches, is to meet thebandwidth access and Ethernet multi business focus and the introduction of a new generation of green energy full Gigabit Ethernet switch. The VRP software platform of high performance hardware chips and the Huawei Company based, has large capacity, high density Gigabit ports, can provide Gigabit uplink, fully meet the user access, networkconvergence, IDC Gigabit access and Gigabit to the desktop and other application scenarios.

Mature and stable VRP platform based on S5700-28C-SI, supports IPv4/IPv6 dual stack,IPv6 routing protocol (RIPng/OSPFv3/BGP4 + /ISIS for IPv6), IPv6 over IPv4 (/6to4 /ISATAPmanual tunnel tunnel tunnel tunnel). S5700 can be deployed in the pure IPv4 or IPv6 network,also deployed in the IPv4 to the IPv6 network can coexist, fully meet the requirements ofnetwork from IPv4 to IPv6 transition.

S5700-28C-SI intelligent iStack stack, the stack multiple support characteristics of theswitches are combined together, the combination logic into a virtual switch. IStack stacking system through multiple member equipment redundancy, improves the reliability of device level; function through the link span apparatus polymerization, improves the reliability of link level. IStack provides a powerful network expansion ability, by increasing the member equipment, can be easily extended stack system of the port number, bandwidth and processing capacity. IStack simplifies the configuration and management, stacked, multiple physical equipment virtual become one device, the user can through any one member loginstacking system, unified allocation and management of all members of the stacked system equipment.

S5700-28C-SI price

Most website there are not the latest price for the S5700-28C-SI, such as http://suentek.en.alibaba.com/product/710381987-215432051/Huawei_Gigabit_Enterprise_Switches_S5700_Series_S5700_28C_SI.html.

And on http://www.comms-express.com/products/huawei-s5700-28c-si-mainframe/ theprice is so high Accoding to our supplier, £1280.45. 

huanetwork.com, the price of S5700-28C-SI is US$995.00. Usefull to you, of course, the original Huawei switch.

Request a quote for S5700-28C-SI by emailing us at sales@huanetwork.com or pick up thephone and speak to one of our friendly and helpful sales reps at +852-30501940 (HongKong).

How to configure the SSH on Huawei S5700

How to configure the SSH on Huawei S5700, S5700-24TP-SI-AC as the example.

Requirements: PC client can remote login the switch through the SSH.

Step one, to generate the local pair key:

[test]rsa local-key-pair create

The key name will be: Auotnavi-callcenter-01_Host

The range of public key size is (512 ~ 2048).

NOTES: If the key modulus is greater than 512,

It will take a few minutes.

Input the bits in the modulus[default = 512]: 1024

Generating keys...

Step two, configuration of the VTY user interface:

[Auotnavi-callcenter-01]user

[Auotnavi-callcenter-01]user-interface vty 04

[Auotnavi-callcenter-01-ui-vty0-4]authentication-mode AAA

[Auotnavi-callcenter-01-ui-vty0-4]protocol inbound SSH

Step three, create user SSH and password

#aaa

#local-user root password simple 123456

#local-user root privilege level 3

#local-user root service-type SSH

Step four: the authentication mode and service mode to configure SSH users

[Quidway] SSH user authentication-type password user name

Or [Quidway] SSH authentication-type default password # if too many users can directly set the default authentication mode

[Quidway] SSH user username service-type {sftp stelnet all} | | # this step is not configured,server refused to start a may occur in shell/command.

Step five: enable SSH service

[Quidway] stelnet server enable

S5700 Huawei, know more on huanetwork.com

Where to buy Huawei AR3200 series enterprise routers

There are many suppliers for this, according to our research on Huawei AR3200, the best website is from, http://www.huanetwork.com/huawei-router-ar3200-series-price_c5 , but they are based in Hong Kong, so may take 3 days to reach your country.

Huanetwork.com offers Huawei  AR3200 Series Enterprise Routers, AR3200 Series routers are designed to provide secure unified voice and data communication with exceptional performance and scalability to meet the demands of today’s enterprise requirements. The AR3200 routers integrate routing, switching, 3G, voice, and security functions. It utilizes a multi-core CPU and non-blocking switching structure providing industry-leading system performance and extensibility, supporting evolving service development requirements. Huanetwork.com ships Huawei AR3260 router to worldwide.

The AR3200 uses the embedded hardware encryption technique and supports the voice Digital Signal Processor (DSP). It supports firewall functions, call processing, voice mail, and various application programs. The AR3200 supports various wired and wireless access modes, such as E1/T1, xDSL, CPOS, and 3G.

AR3260 can choose a variety of main control board,SRU40/SRU60/SRU80/SRU100/SRU200/SRU400 respectively, the main controlsupport pluggable maintenance. The main difference lies in the forwarding performance and flow management function, the master can support hardwarelevel TM (traffic management) function, supports hardware HQoS.

If you want to buy the Huawei AR3200 series enterprise routers, huanetwork.com is a good chooce. As they supply the original products, and the price is lower than others. Of course, the quality are guarantee. You can visit the Huawei AR3200 for more information, or send email to sales@huanetwork.com for consult. 

Huawei S5700-BAT -- the first built-in battery swtich

The access layer Quidway S5700-BAT -- never power down

As a high degree of integration equipment, S5700-BAT series battery switch to meet customer deployment flexibility, high reliability, green network requirements. There the batteryswitch, to fill the gaps in access layer device electric technology, ensure the connection of each node in the network, each level, real let customer service implementation neverinterrupt.

1 The current power supply mode

Network equipment power means that the disruption and economic loss of business. In order to ensure the network equipment redundancy and reliability, usually of double point and in the core room expensive UPS power, but usually only on the core of UPS equipment and datacenter power supply, and the power to protect the access layer equipment, are often too busy. Therefore, in the core equipment and terminal notebook energized condition, the access layer equipment into the weak point of network interruption. There have been manycases tell us, light both power supply core layer is not enough to keep the network running smoothly. So, how to change the current access layer switch embarrassing situation?

2 Power supply access layer switch

The access layer switch deployment position, generally speaking, the access layer switchesused to directly access the city power supply power to their own way; at the same time, in some special environment, access layer switches also support DC power supply.

3 Huawei S5700-BAT --  the first built-in battery swtich

Huawei launched the built-in battery rechargeable switch S5700-BAT series. S5700-BATseries of built-in rechargeable, battery power is cut off automatically switches to the battery supply can continue to work without interruption of service. The power off automatically switches to the battery and the switch for the work, the switching process 100% no packet loss. Of course, when electricity is restored, the switch will automatically switch back to the mains power supply, switching process of 100% no packet loss.

Application of Huawei Quidway S5700-BAT series:

L access layer device in the network of the frequent power cuts

L with no power supply case, for temporary emergency network

Green energy technology based on Huawei, battery rechargeable power supply switcheshave continued strong, without city electricity, the battery can be independent power supplytime of about 11 hours (30% port flow case). At the same time the battery rechargeableswitches support Huawei intelligent power management scheme, visualization of batterytypes, capacity, status and other parameters, can be like mobile phone battery, so you cangrasp the dynamics of the state of the battery and power supply; the battery power is low or failure will be reporting alarm, help the maintenance staff to understand the state of the battery and the fault analysis. At the same time the battery rechargeable switches to meet customer demand diversification choice, can be built in two types of lithium battery (4AH or 8AH), and can be connected with lead-acid batteries.

Where to buy Huawei WDM: OSN 6800, OSN 8800

OptiX OSN 8800 is mainly applied to the national trunk, regional / provincial trunk and part ofmetro core site, its large capacity OTN scheduling capability and long wave characteristics is the basic characteristic, integration with ROADM, T-bit, 100M-100G, cross grain schedulingphotoelectric intelligent, 40G/100G, rich management and protection function, the OTN/WDM backbone transmission can be constructed end-to-end solutions for operators, large capacity and ultra broadband intelligent transmission scheduling.

OSN 6800 has a gathering, transmission and cross ability, in support of the three layerstructure of dynamic traffic grooming (optical cross connect, ODU cross connection and integration of LAN Switch), GMPLS integrated intelligent control plane, large capacity andlong distance transmission advantage and have similar SDH/SONET management ability and WDM. Platform using ROADM, tunable optical module, ASON/GMPLS, 40G, LAN,Switch, ODB/eDQPSK and other advanced technology, architecture is more flexible, more suitable for broadband transmission.

Huawei WDM/OTN series end-to-end intelligent optical transport platforms are applicable to the backbone core layer, metropolitan core layer, metropolitan aggregation layer, and metropolitan edge access layer. Huanetwork.com wholesales Huawei WDM products, include Huawei OSN 6800, OSN 8800. Get the best price Huawei WDM products from Huanetwork.com, ships to worldwide.

Contact info:

Telephone: +852-30501940(Hong Kong)

Email:   sales@huanetwork.com(Sales Inquiries)

Address: 3/F, China Fen Hin Bld., 5 Cheung Yue St., Cheung Sha Wan, KLN., Hong Kong

Website: http://www.huanetwork.com

Datasheet and price: Huawei switch S2700-9TP-EI-AC: US$197.00

Datasheet of the S2700-9TP

8 10/100Base-TX Ethernet ports, 1 10/100/1000Base-T Ethernet ports, 1 Multiplexing Gigabit Combo SFP

EI version provides AC or DC power supply two models, SI version provides AC power supply models

The forwarding performance: 2.7Mpps

Exchange capacity: 32Gbps

Network standard IEEE: 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE802.1Q, IEEE 802.1d, IEEE 802.1X

VLAN supports the VLAN function

The network management function support network management function

Duplex transmission support full duplex

The MAC address table: 8K

Dimensions: 250 x 180 x 43.6mm

The power supply voltage of AC: 100-240V

Maximum power <14.5W

Weight <1.4Kg

Working temperature: 0-50 ℃

Humidity: 10%-90%

Storage temperature: -5-55 ℃

Storage humidity: 10%-90%

Price of the S2700-9TP-EI-AC

The best price according to my search form from the huanetwork.com: US$197.00,

Contact info:

Telephone: +852-30501940(Hong Kong)

Email:   sales@huanetwork.com(Sales Inquiries)

Address: 3/F, China Fen Hin Bld., 5 Cheung Yue St., Cheung Sha Wan, KLN., Hong Kong

Website: http://www.huanetwork.com

Huawei S2700 series enterprise switches (hereinafter referred to as S2700) is the intelligent fastEthernet access switches to a new generation of green energy-saving Huawei Company. It is based on a new generation of switching technology and Huawei VRP (Versatile RoutingPlatform) software platform, can provide a simple and convenient installation and maintenance, at the same time fusion network deployment, perfect safety and the control strategy of QoS, green environmental protection and other advanced technology and flexible,which can meet the Ethernet multi service bearer and access to enterprise users, powerbuilding future oriented IT network.

● Easy Operation

The built-in 6KV lightning protection technology

● 802.1x authentication and MAC authentication

● PoE+

S2700 series type device, provides the Standard Version (SI) and enhanced version (EI) of two kinds of product model. Compared to the S2700-SI series, S2700-EI series of increase of QinQ, ACL, 802.1X features suppor

Example: How to quickly set the Huawei router (2)

Below we give an example to explain.

1, the definition of the router machine name

If you want to define the router machine named huawei2611, use the following command:

Router enable AR1200

Password:******

Router#config terminal

Router (config) #hostname? Huawei2611

2, setting the privileged mode password

The router operation, type enable to input corresponding password. In order to set the password, should use the following command in the configuration mode:

Router (config) #enable secret mypassword

In order to change the password for mypassword.

3, configure the Ethernet port information

Enter the following command in the configuration mode:

Router (config) #interface Ethernet? 0/0

Router (config-if) #ip address 255.255.255.0 202.102.224.25?

Router (config-if) #ip net inside

4, the configuration of synchronous port

Router (config) #interface serial 0/0

Router (config-if) #ip address 202.102.211.108 255.255.255.248

Router (config-if) #ip net outside

5, add static route

In the Internet access mode, using the static routing, it needs to be a static route records are added, as follows:

Router (config) #ip router 0.0.0.0 0.0.0.0 202.102.211.107?

6, other configuration

Router (config) #ip net inside source list 1 ethernet0/0 overload

Router (config) #access-list 1 permit any

Configure router has 2 main types, one is manual configuration, access to the IOS, the router configuration through the command line mode;

Another is to run the Setup program, which is a IOS provides interactive configurationsoftware, suitable for new users on the IOS command is not too familiar, users in the studyIOS configuration command, using manual methods of router configuration can greatlyimprove the efficiency of.

IOS has more than one level Huawei AR2200 of other operations, on different levels, use the command, configuration can not, too.