Huawei switches must use Huawei-certified
optical modules. Non-Huawei-certified optical modules cannot ensure
transmission reliability and may affect service stability. Huawei is not liable
for any problem caused by the use of non-Huawei-certified optical modules and
will not fix such problems.
Note:
The methods provided here are only for
reference. To confirm whether optical modules you use have been certified by
Huawei, contact Huawei Technical Assistant Center (TAC).
If the optical modules you use are delivered
after July 1, 2013, use either of the following methods to determine whether
they have been certified by Huawei.
The Method of How to Identify
Huawei-Certified Optical Modules
Method 1: Check for "HUAWEI" on the
LabelIf an optical module has been certified by Huawei, its label contains "HAUWEI", as shown in Figure 1.
 |
| HUAWEI Module |
Method 2: Run the display transceiver
Command, I take the switch S5700-28C-EI
for example.
If
an optical module meets the following conditions, it has been certified by
Huawei. Otherwise, the optical module is not a Huawei-certified one.
·
In the display elabel
command output, the Manufactured
field displays a date later than 2013-07-01.
·
In the display version
command output, the display version is V200R001C00 or later.
·
In the display
transceiver command output, the Manufacturing Date field displays a date
later than 2013-07-01, and the Vendor
Name field displays HUAWEI.
<HUAWEI> display transceiver
XGigabitEthernet2/0/0 transceiver information:
-------------------------------------------------------------
Common information:
Transceiver Type :XFP-STM64-LX-SM1310
Connector Type :LC
Wavelength(nm) :1310
Transfer Distance(m) :100000(9um)
Digital Diagnostic Monitoring :YES
Vendor Name :HUAWEI
Vendor Part Number :02315208
Ordering Name :
-------------------------------------------------------------
Manufacture information:
Manu. Serial Number :210231520810E4000803
Manufacturing Date :2013-09-11
Vendor Name :HUAWEI
More related：
没有评论:
发表评论