Basic configuration of the Huawei 5300 switch

Basic configuration of huawei OSN 500 the Huawei 5300 switch

The following configuration on the switch:

<switch>system-view

[switch]vlan 10

[switch-vlan10]quit

[switch]interface VLAN 10

[switch-vlanif 10]ip address 192.168.1.2 24 / / guarantee and the router IP in the same network segment

[switch-vlanif 10]quit

[switch]interface Ethernet 0/0/1

Join the vlan10 [switch-interface Ethernet 0/0/1]port hybrid untagged VLAN 10//untag

[switch-interface Ethernet 0/0/1]quit

/ / finish the configuration, the routers and switches 192.168.1.1 and192.168.1.2 should be Ping each other.

3 then is configured on the switch telnet login command:

[switch]aaa

[switch-aaa]local-user admin password simple admin //2 admin are the account password, can set up

[switch-aaa]local-user admin privilege level 3 / / set the account level, 3 is the most advanced

Set local account service type [switch-aaa]local-user service-type telnet / /telnet

[switch-aaa]quit

[switch]user-interface vty 04

[switch-user-vty0-4]authentication-mode AAA / / set login user authenticationfor AAA, just setting account that set the account password

[switch-user-vty0-4]protocol bind all / / binding agreement for all users,including telnet/ftp/ssh. When these registry switches are huawei OSN 550 using the user interface.

[switch-user-vty0-4]quit

More information, please view ：http://cisco2960.soulcast.com/