2014年5月23日星期五

Example for Configuring Communication Between VLANs Using VLANIF Interfaces



Huawei AR150&160&200&1200&2200&3200 Series Enterprise Routers Configuration Guide - Example for Configuring Communication Between VLANs Using VLANIF Interfaces

Networking Requirements
As shown in Figure 1, Ethernet 2/0/1 of the Router is connected to the uplink interface of SwitchA.
On SwitchA, the downlink interface Ethernet 2/0/1 is added to VLAN 10 and the downlink
interface Ethernet 2/0/2 is added to VLAN 20.
PC1 in VLAN 10 and PC2 in VLAN 20 need to communicate with each other

Figure 1 Network diagram for communication between VLANs through VLANIF interfaces

Configuration Roadmap
The configuration roadmap is as follows:
1. Add Ethernet interfaces to the VLAN.
2. Configure VLANIF interfaces.

Procedure
Step 1 Configure the Router.
# Create VLANs.
<Huawei> system-view
[Huawei] sysname Router
[Router] vlan batch 10 20
# Add interfaces to the VLANs.
[Router] interface ethernet 2/0/1
[Router-Ethernet2/0/1] port link-type trunk
[Router-Ethernet2/0/1] port trunk allow-pass vlan 10 20
[Router-Ethernet2/0/1] quit
# Assign IP addresses to the VLANIF interfaces.
[Router] interface vlanif 10
[Router-Vlanif10] ip address 10.10.10.1 24
[Router-Vlanif10] quit                   
[Router] interface vlanif 20
[Router-Vlanif20] ip address 20.20.20.1 24
[Router-Vlanif20] quit

Step 2 Configure SwitchA.
# Create VLANs.
<Huawei> system-view
[Huawei] sysname SwitchA
[SwitchA] vlan batch 10 20
# Add interfaces to the VLANs.
[SwitchA-Ethernet2/0/1] port link-type access
[SwitchA-Ethernet2/0/1] port default vlan 10
[SwitchA-Ethernet2/0/1] quit
[SwitchA] interface ethernet 2/0/2
[SwitchA-Ethernet2/0/2] port link-type access
[SwitchA-Ethernet2/0/2] port default vlan 20
[SwitchA-Ethernet2/0/2] quit
[SwitchA] interface ethernet 2/0/3
[SwitchA-Ethernet2/0/3] port link-type trunk
[SwitchA-Ethernet2/0/3] port trunk allow-pass vlan 10 20
[SwitchA-Ethernet2/0/3] quit

Step 3 Verify the configuration.
On PC1 in VLAN 10, configure the default gateway address as the IP address of VLANIF 10 (in this example: 10.10.10.1/24).
On PC2 in VLAN 20, configure the default gateway address as the IP address of VLANIF 20 (in this example: 20.20.20.1/24).
After the configuration is complete, PC1 in VLAN 10 can communicate with PC2 in VLAN 20.
----End

Configuration Files
Configuration file of the Router
#
sysname Router
#
vlan batch 10 20
#
interface Vlanif10
ip address 10.10.10.1 255.255.255.0
#
interface Vlanif20
ip address 20.20.20.1 255.255.255.0
#
interface Ethernet2/0/1
port link-type trunk
port trunk allow-pass vlan 10 20
#
return
Configuration file of SwitchA
#
sysname SwitchA
#
vlan batch 10 20
#
interface Ethernet2/0/1
port link-type access
port default vlan 10
#
interface Ethernet2/0/2
port link-type access
port default vlan 20
#
interface Ethernet2/0/3
port link-type trunk
port trunk allow-pass vlan 10 20
#
Return

More related:

没有评论:

发表评论